60 GHz networking is no longer a privilege – with our new Cube Lite60 CPE you can run extremely cost-effective setups in situations with enterprise-level demands: shopping malls, stadiums, industrial parks, busy urban areas and so on. Same price as SXTsq, 4x the distance!
Connect up to eight of these units to a 60 GHz access point, such as our wAP 60G AP or wAP 60Gx3 AP, and enjoy smooth and stable wireless signals without interference from all the 2.4/5 GHz networks.
Cube Lite60 is designed to be less visible than a traditional dish CPE, but make no mistake – it’s still a real powerhouse. The effective point-to-point distance between Cube Lite60 units is up to 800 meters, point-to-multipoint – up to 500 meters.
No need to share the frequency with your neighbours – choose 60 GHz, almost like taking a helicopter during a traffic jam!
Ethernet test results
RBCube-60ad QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results