Metal 52 ac
zoom_out_map
chevron_left chevron_right

Metal 52 ac

2.4/5GHz software selectable AP/Backbone/CPE with AC support, high TX power, N-male connector, Omni antenna included

US$119.00 (tax incl.) US$119.00 (tax excl.)
Back-Order, Contact us for the ETA
new_releases Product available for back-orders

Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high-speed wireless.

The Metal 52 ac supports 2.4GHz, 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 a/n/ac for 5GHz).

We have two versions available.

- RBMetalG-52SHPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock cannot be removed.

- RBMetalG-52SHPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Wireless specifications

5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s 31 -93
54MBit/s 27 -78
MCS0 30 -93
MCS7 26 -74
MCS9 22 -69
2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 31 -97
11MBit/s 31 -91
6MBit/s 31 -93
54MBit/s 28 -77
MCS0 31 -93
MCS7 27 -72

Ethernet test results

RBMetalG-52SHPacn QCA9556 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Bridging none (fast path) 81.2 986.1 233.1 954.8 576.7 295.3
Bridging 25 bridge filter rules 81.2 986.1 123.7 506.7 117.8 60.3
Routing none (fast path) 81.2 986.1 233.1 954.8 454.8 232.9
Routing 25 simple queues 81.2 986.1 152.6 625 137.2 70.2
Routing 25 IP filter rules 69.4 842.8 66.3 271.6 68.7 35.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

RBMetalG-52SHPacn
21.50 cm
6 cm
3.80 cm
6 kg
4752224004338
10/100/1000 Ethernet ports
1
Product code
RBMetalG-52SHPacn
Architecture
MIPSBE
CPU
QCA9556
CPU core count
1
CPU nominal frequency
720 MHz
Dimensions
215x60x38mm
License level
4
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C to 70°C
Max Power consumption
11 W
PoE in
Passive PoE
PoE in input Voltage
10-30 V
Number of DC inputs
1 (PoE-IN)
Voltage Monitor
Yes
PCB temperature monitor
Yes
Wireless 2.4 GHz number of chains
1
Wireless 2.4 GHz standards
802.11a/b/g/n/ac
Antenna gain dBi for 2.4 GHz
6
Wireless 2.4 GHz chip model
QCA9889
Wireless 5 GHz number of chains
1
Wireless 5 GHz standards
802.11a/b/g/n/ac
Antenna gain dBi for 5 GHz
6
Wireless 5 GHz chip model
QCA9889

General information

All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.

Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.

Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.

Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.

Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.

Remote training sessions and certification exams are not allowed.

MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.

Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.

The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.

Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.

Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.

Certificates will only be valid for three years.

Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.

By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.

Returns:

All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase.  All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.

You might also like